Husqvarna 450 e-series 18" Chain Saw "chainsaw stop pulling trigger" Questions

Ad

4.0 electric poulan chainsaw stopped working, wont restart, cleaned out chain area stopped working check the safety button that you have to use when you pull the trigger

Ad

...fast and not pulling trigger The idle speed screw (not the idle jet screw) is set too high. Turn it CCW while running until the chain stops turning, yet the engine keeps running. Hope this

Ad

...CHAINSAW PUT IT UPRIGHT ON FLAT GROUND and put you right foot as far in the trigger handle as you can, put enough weight to stop the bar or chain touching dirt, dirt will blunten a chain very quickly ...

...You have some type of blockage in your lance. I would suggest either taking off the tip and pulling the trigger to blow the obstruction out or trying to clear the blockage with a guitar

...chainsaw. I can get it to start and stay running as long as I have the choke on. I can even run it at high speed using the choke control. When I pull the trigger to feed it gas it starts to stall. I ...

Question about Poulan Garden

1 Answer

stop feature built into the trigger mechanism which is deactivated when the trigger is squeezed. So, in order to move the chain along the bar the trigger needs to be squeezed releasing the motor-stop.

Question about Makita Garden

1 Answer

...stop-circuit" wire and should be inserted into the notch atop the rotating shaft, directly UNDER the flat brass spring. If assembled correctly, the terminal end of the black wire will rotate when the ...

Question about Poulan Garden

1 Answer

...stop spinning on the Poulan Pro 42 cc 18 inch chainsaw, will cut wood with out pulling trigger. Runs is very vast, dies when pull trigger. I would say it has an air leak, through a gasket or crank ...

Question about Garden

1 Answer

...stop start, choke and half throttle lever, depress the throttle trigger and at the same time pull the lever fully uplet go of the throttle trigger which should now be lock up, this will engage the ...

chainsaw more information please..To lock the choke on:- 1. depress dead mans trigget on top of back handle2. squeeze throttle trigger fully in.3. slide on switch fully down to 'full choke' position.

Not finding what you are looking for?
Husqvarna 450 e-series 18" Chain Saw Logo

139 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...