Jacuzzi - Bathtub - Alcove - Navona - R105917 "water jets turned" Questions

...jets off which causes water to go backwards in the system and the water goes out the air controls. solution: check the jets to make sure the jet faces are turned on and/or tell someone to quit ...

...JETS FORCE IS TOO STRONG, WATER FLIES EVERYWHERE. HOW DO WE CONTROL THE AIR PRESSURE? Each bathtub has at least one air control on the tub that when opened lets air into the jets that produce the ...

...jets come on and won't shut off. No water in tub. The only way I can get the jets to shut off is to turn the power off to the outlets. Last night it came on and hadn't been used in 2 days. Is it ...

water and run jets to clean them? Put white vinegar in the water and run it through your tub. Fill the tub to it's maximum running capacity, which is normally just above the jets, and pour a gallon of

...jets the water does not come out properly hi there. FIrst of all be sure the water lever is above all of the jets for it to work properly. REgarding the jet where the water does not come out properly ...

...jets. Again does the bath water flow back? Thanks The soapy water will fill all of the jets, tubes and the pump assembly. Will it hurt the tub if the jets are not running? The soap film will build up ...

...jets on my acer swirl bath tub don't push water out like the other 4, and where can I find replacement jets. We bought the home recently and it was built in 2000. so tub is 10 yrs old. please ...

...for that to happen but the jet faces on the two back jets may be turned off or down. Try turning the face of the jet clockwise and see if you get more water flow out of each jet. Rod US Parts ...

...water through the jets? It worked for 3 years or so but was not used much. I fill the tub with water and try for turn on the pump but the water does not come out of the jets... I think the pump just ...

...jets to get more water flow to the other jets may not be very practical as you will need to remove the tub and cut the plumbing to the jet in question and cap it off. The other solution that you may ...