Craftsman 1/2" Impact Wrench "new air gun" Questions

...air. I'm running 100-120 psi, filter, oiler. I have put in new vanes, have run them dry, wet, very wet, and have tried every combination possible. We even buy new guns that only last a few weeks ...

...through the air intake fitting every so often depening how much you use your air tools, it may be time for a new one but i would try the air tool oil first before bying a new one, i hope i

... you need a new rebuild kit with O rings and gaskets,take gun completely apart and make sure you get new air vanes too,the scratches dont make that much difference,but old seals will rob power from ...

...new impact sockets, but can't get a socket onto the gun. Leaned on it with all my weight, wiggled, nothing. and yes they are both 1/2" drive. WTH? I think your meaning that the socket doesnt seem to ...

inner parts of the impact, lubricate with W-D 40, and reassemble. 4. I'm all out of ideas.. If that didn't fix it, I'd go get a new one. Best of luck, --W/D-- Have you added any air tool oil in awhile

new one. http://www.ingersollrandproducts.com/am-en/products/tools/edge-series-tools/accessories/general-air-line-accessories/air-line-couplers-plugs-and-connectors That web site there should help you

new part, and the gun disassembled. Is there a trick to get the rotor out. I can't seem to get it out. Any suggestions? Yup, there is a procedure for that. 1. Use a good penetrating lubricant and soak

...air intake on my CH PL 150297 might be the problem. Where is it located and what size do I need. Is there an seal ring kit containing all seals for this model available ? Thanks, Franz The problem is ...

...new one i bought today and along with my 3/8 and my 3/8 air ratchet and the other stuff is IR ask your ask your mac guy he should know and to answere the ? you need to rebuild it or oil it The 434 is ...

...air. The anvil rounds over, then the pins break. New pins will just keep on breaking without a new anvil. there is a rebuild kit available anywhere they are sold, biggest reason for power loss is the ...