Craftsman 1/2" Impact Wrench "apart clean air" Questions

Ad

Question about Chicago Pneumatic Air Tools & Compressors

1 Answer

...it taking it apart to clean it and inspect it for bad or broken parts christine.s.yehlik@nasa.gov thank you Follow this link to view the parts diagram: ...

Ad

Question about Impact Air Tools & Compressors

2 Answers

...apart, clean everything, and put in fresh oil. It's easy. There's definitely something wrong in the interior. You're most likely going to have to take it apart to figure out the issue. it might not ...

Ad

Question about Chicago Pneumatic Air Tools & Compressors

1 Answer

...take apart cp 7200 Can anyone provide a step by step procedure for taking one apart to clean and lubricate it? Lock the base in a vise and turn the head off.  Everything will come out fo the

...apart and cleaning it should do the trick. Start at the working end end and separate the front end. Work on a clean bench where little items (screws, ball bearings etc) won't roll off and get lost. ...

Question about Campbell Hausfeld Air Tools & Compressors

1 Answer

...ball bearing, is there two bearings. It is campbell hausfeld PL 1502 air impact I took it all apart and cleaned it all, reassembled,oiled it and now it is as good as new. \Thanks for your ...

Question about Craftsman Air Tools & Compressors

1 Answer

...- but it will not take the lug nuts off my GMC Yukon. Whats likely the problem? It needs to be taken apart and cleaned then lube it with air tool oil and reassemble it should make a big ...

Question about Craftsman Air Tools & Compressors

1 Answer

...apart and see whats up. You'll probably find worn vanes or a vane stuck in the rotor. There will be several vanes, and they must slide in and out of the rotor easily. If you arte lucky you'll just ...

Question about Ingersoll Rand Air Tools & Compressors

1 Answer

...apart and cleaned it and oiled and put it back together and same thing? i have the same problem, and a fellow co-worker of mine told me about the problem. here it is.. on the handle there are two ...

Question about Ingersoll Rand Air Tools & Compressors

1 Answer

ingersoll rand 231A 1/2 inch impact wrench no power if you have already used air tool oil you may have to take it apart and clean the motor vanes

Question about Chicago Pneumatic Air Tools & Compressors

1 Answer

...Clean them good with solvent and using a paint brush re coat then with a special hammer grease that can be purchased at a local tool repair and supply store.Also check fwd and reverse seals while you ...

Not finding what you are looking for?
Craftsman 1/2" Impact Wrench Logo

44 questions posted

Ask a Question

Usually answered in minutes!

Top Craftsman Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1420 Answers

JOHN LAPIER

Level 3 Expert

2595 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

207 Answers

Are you a Craftsman Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...