Craftsman 1/2" Impact Wrench "air" Questions

Wrench Problem What is the best way to use my air wrench? * Proper match between air compressor and tool ratings. * Correct fittings that match the tool and air hose. * Well-maintained air compressor ...

Craftsman 1/2 inch impact air driver leaks air New, out of the box, Craftsman 1/2 inch impact air driver leaks air from the exhaust port as soon as tool is plugged into air source. put a bunch of ...

Is the oil used for CP734 air wrench for air line use & air gun body oil one & the same product C.P. recommends 3/4 oz. of SAE30 oil in the hammer (clutch) mechanism, and SAE10 for the air ...

1" Cp797 Air Impact Wrench Standard: it works for a while and then just blows air , but... It works for a while and then just blows air but the next day it will work and then blow air again. THE TOOL ...

Air leak on my IR231 A When I hook up the air hose I have a little bit of air leaking through the exhaust. What does this wrench need to fix this? It should just be the valve o-ring that is letting ...

model 734 1/2 in impact.wont blow air ,wont rotate,no tension on trigger.feel like problem may somehow be in trigger housing.... Yes, if you take it apart you'll find that the trigger isn't allowing ...

...working I have a Craftsman 1/2 inch impact wrench, when I pull the trigger all you hear is air escaping but there is no turning of the shaft? Make sure you have at least 90 pounds of air and ...

my ingersoll 231 has plenty of power in forward but acts like it has brakes on or reduced air in reverse i have cleaned it and can find any air interuption anywhere ron try a drop of thin oil first ...

I have a husky impact wrench, set at 100psi, but all that happens when i squeeze the trigger is air comes out of three vents on the bottom of the wrench, just adjacent to the imput hose. Is there ...