Question about Craftsman Air Tools & Compressors
Craftsman 1/2 inch impact wrench,not working I have a Craftsman 1/2 inch impact wrench, when I pull the trigger all you hear is air escaping but there is no turning of the shaft? Make sure you have at
Question about Craftsman Air Tools & Compressors
...wrench, mine is broken If your local Sears store can't help you, try looking to see if you have a Snap-On, Corn-well, or Matco tool distributor in your area. Many air tools are manufactured by ...
Question about Craftsman Air Tools & Compressors
and hook up the hose. Pull the trigger and work the wrench forward and backward several times. Make sure the forwards/backwards slide bolt(mechanism) goes all the way both ways. Good luck,best regards
the trigger stop working the ratchet works but i have play with the air hose on and off to use it. i oil it. sounds as if it needs servicing ,not expensive -----what do you oil it with ? if you dont ...
Question about Craftsman Air Tools & Compressors
...wrench, brand new impact sockets, but can't get a socket onto the gun. Leaned on it with all my weight, wiggled, nothing. and yes they are both 1/2" drive. WTH? I think your meaning that the socket ...
Question about Craftsman Air Tools & Compressors
I get no movement on the socket just air blowing out of the bottom of the gun The air motor is probably shot. Turn the socket a few revolutions by hand, and see if it frees up and starts working. A ...
Question about Craftsman Air Tools & Compressors
my air ratchet does not work. Head will not turn and air comes out of breathing vents, like it seized up I put some lubrication oil into the air line then made sure that it goes in there by moving the
Question about Craftsman Air Tools & Compressors
throttle valve is rotten and tool runs when you plug in the air without pulling trigger there is a neoprene O ring in the trigger area ,that breaks down ,it needs a service by an air tool repairer ,it
Question about Ingersoll Air Tools & Compressors
air impact tool does not engage but will eventually engage after switching directions. I have a standard duty 1/2" Craftsman pnuematic impact tool. problem is it seems to not engage in gear, however ...
impact wrench is not working at all.the air is coming out of the hole at the bottom of wrench next to where the air hose is hooked up. fill down the air pipe wit penatrating oil hold trigger and keep ...
7 questions posted
Usually answered in minutes!
49 Questions
42 Questions
38 Questions