...your gun (measure the angle with a protractor) . The lumber yards do not have a very good selection of brands. Try a professional fastener store that deals in nails and nail gun repair. Good ...
Paslode cordless nail gun which way does the Paslode cordless nail gun which way does the driver blade go in??? Chamfer side up or down??? chamfer side goes towards the nails/magazine
Question about Air Tools & Compressors
...nail in gun or the driver blade tip is no longer square. Easy to check both. With nails removed strike nose of gun down against rubber mat or soft wood to move driver down for examination. It should ...
Question about Air Tools & Compressors
...Nail feed spring too weak? Nails defective? Most likely the driver is not returning to top of cylinder, thus driver blade does not allow nails to move into position. easy to check. With air line ...
gun so that I know it will fit the nose. I grind the side of the used driver slightly to allow space for the jammed nail to pass the driver that I am using for ram otherwise the ram (used driver) will
Question about Grip Rite Air Tools & Compressors
...directly under the path of the driver. If the nails are not made correctly or the wrong nails are in the gun, the angle of the nails may be preventing full contact of the driver to nail head. Good ...
Question about Porter Cable Air Tools & Compressors
...nail at 90 lb. pressure This gun is about 2 years old but seldom used. Sounds like you have a nail jam or a broken driver blade - there are other issues that can cause this but the most common is a ...
...nail jam. Would that be the source of the air leak or should I order an O-ring kit? Help please. Dewalt uses some vinyl orings (clear to gold colored) and some buna orings (black) in the gun. The ...
Question about Stanley Air Tools & Compressors
gun or the driver is damaged. The driver of a nailer has a taper on one side of the blade to prevent the driver from hitting two staples. The taper will push the remaining staples back into the rails.
...nail gun not firing i disassembled my paslode framing gun,put it back together and it dosnt fire and do i need to oil piston shaft Hi, Yes you need to oil driver blade piston. You need to check for ...
366 questions posted
Usually answered in minutes!
4 Questions
9 Questions