RTO PasLode 900420 Impulse Framing Nailer  "check plug spark" Questions

...fuel cell. Remove cap and check spark lead, insert in spark plug and replace cover. Clean tool cylinder head and spark plug. If this doesn't work, I suggest contacting Paslode directly ...

...plug is very rarely a problem - the most common issue from the details you described is a bad fuel cell. Check the date code on the bottom of the cell - it doesn't matter if you just bought it, some ...

...plug. if you get a spark great if not check the pink wire going to the spark plug is ok and pushed firmly into the spark unit 900474. this should solve your problems and hope i have helped. let me ...

Check sleeve is clean do not add oil to working parts (except a smear when cleaning sleeve and around O rings when reassembling gun) replace the fan motor, if it has a short it sends a fault signal to

...check the date stamped on the bottom of the cylinder. The cylinder o-ring is generally loose fitting and the spark plug is very seldom an issue. Is the green light on the handle flashing when you ...

plug to get a more positive spark, also check o-ring on fan housing as if this is damaged it will alow gas to escape and no ignite. I had the same problem with a cordless framing nailer. There was a o

gas to get more rpm it's star skeeping (in gear or not in gear) clean airflow sensor You have a bad fuel injector or spark plug. Run a fuel system cleaner through your car and check the plugs for wear

Won't fire take out the spark plug, check for oil on it. clean it and put it back in. you should be good to go. I was.

spark from?? you can test this tool with the cylinder off by depressing the roller lever and holding the switch in the on position. If there is fire across the gap it should work and then I would look

...time any ideas check the spark plug and also the spark plug wire, making sure that it is fully inserted into the spark unit. Also look for loose connectors at the switch area. I have seen all