...table saw over to tighten the nuts and bolts on the table stand. Turned it back upright but when I turn on the saw the motor starts but the shaft and blade spin freely. The model of the saw is 113 ...
table saw will not start. Power is getting to the on/off switch, but the motor will not start or make any kind of noise. Is there a most likely cause of this problem? Model#137.248100/with stand Check
be repaired or can I get a replacement motor? if the motor RPM drops dramatically when the noise starts, it is probably a dry motor bushing, if this just started, lubricating the motor may just fix it
...table saw I hit the switch and it would not start, but it made a "click". I thought there might be a "reset button" but I could not find one. I by-passed the switch and it made no difference. Any ...
...table saw won't start. Tried to turn on my Powermatic 66 table saw this morning. Blade moved one half inch as if trying to start. Tried reset button on motor, still nothing. I believe it may be ...
...table saw motor does not turn, very stiff happened suddenly.. motor start makes awful noise and does not roatate. Does not kick breaker. Blade cannot be turned by hand or with tool pressure. Blade ...
table saw stopped when cutting a dense piece of wood. Now just hums when turn it on. Not locked up, the pully will move by hand. Do you think replacing the capacitor will work. No restart button. ...
...Table Saw I have the same problem. I tried to rip a pressure treated 2x10 at a 45 deg. angle and the motor siezed! I ran it slowly, but that didn't help. I tried finding a local electric motor shop ...
...table saw I have a Craftsman 10" table saw, mod 113.298750, it is missing the motor base support. Any ideas where I might locate one? Know where I could get a good drawing so I can make one? Also the ...
table saw. The motor will not start. Is there a reset switch on the motor? We have checke dthe electrical supply and it is good check on the motor housing. for a hump, that contains a capacitor , have
30 questions posted
Usually answered in minutes!
2 Questions
