Proform CrossTrainer Treadmill "speeds slows back down" Questions

treadmill slows down Free Spirit Mod.#122300800 when I starting running the treadmill slows right down. make sure you are not in a program. Can you speed it back up?

slows down drastically. Step off and unit speeds back up. Check both belts to be sure they are adjusted and not slipping.Check the underside of the walk belt to see if it feels frayed in the center as

...slows back down c 1900 also the belt stops and starts back up unplug unit remove motor shroud check your speed sensor by the front roller /pulley inspect and see if sensor is about 1/4 to 1/8 in away ...

...slows down and might go back to original speed selected. Sometimes it just stops. Other times you can use it normal. Have you lubricated the the running deck? The lack of lubrication can increase ...

...back down. The third problem that it could be is the walking belt could be worn and need to be replaced. The fourth problem is that the lower board either needs to be adjusted or is going bad, I ...

...slows down after you have been on it for a wile and stays slow when you get of some times it well speed back up after a min or two Dear Sir:You must need to adjust the sensor speed, by that reason ...

...incline stops machine (incline on screen inclines), stop button doesn't do anything, hold down speed and will speed up but take pressure off and slows back to 1.0 Treadmill console needs to be ...

speeds, especiialy if you hold the up or down arrow for a while to get it to speed up or slow down more quickly. Please help me resolve this. Thanks, Doug V Hey Doug, Just wondering has this unit ever

...slows down &blows breaker moter run fine with no load belt backed off re set speed sensor changed power cord pluged .in to circit board ran fine for 2 hrs then stoped motor brushes are bad. when they ...

...orperates great, except when i start walking. It slows down as if brakes are be applied. Once i remove myself it goes back to normal speed. what would cause this problem ?? it has to be ...