Proform Crosswalk 500 Treadmill "tight belt" Questions

...belt is to tight, motor won't run I just bought a new belt for myTreadmill. its a ProForm Crosswalk 2146 and it is so tight the motor won't move the belt even with no load. i discovered a bolt ...

...belt is tight why does it still slip Hello, If the walk belt is tight, you will want to remove the motor hood and watch that the drive belt and motor are staying at the correct speed when the walk ...

...belt is tight. 7. conversely, turn the screws CCW if you need to loosen the belt. Added note: be sure to use some belt lubricant as directed by your user's manual, to prolong your treadmills life. ...

Belt too Tight: If you have adjusted the walking belt or motor belt recently, check for this problem. When the belts start slipping, some people just crank down the belts and on treadmills, tighter is

...belt is too tight or the drive belt needs changed. Unplug the unit remove the motor shroud inspect the drive belt if the rubber feel slick then my recommendation is to replace the drive belt. ...

...belt is really tight and it still slips you have other problems. Please see here for some Nautilus spares: http://www.partsfortreadmill.com/catalogsearch/result/?q=Nautilus+t514 and here for ...

...belt tension.Also if you tightened the walk belt up it may be too tight which could cause it to wear or tear easier,the rule of thumb is tighten the walk belt just tight enough so it doesn't

... walking it slips causing me to almost fal while in operation Ther are two adjustments to check,the tightness of the walking belt(the screws at the back of the treadmill) and the tightness of the ...

...tight Belt stops when I get on it. Checked drive belt it is tight. 1) Try to loose a little the drive belt, for to avoid a higher tension.2) LUBE very well the deck belt, must shure is worn, proceed ...

...spring contacts batteries for better contacts.5) tight the ribbon cables from keypadys vs display board.6) tight the display board connectors vs lower board. Belt is slipping, how do I tighten the ...