Proform Crosswalk 500 Treadmill "motor cover" Questions

...motor cover? The old one is all cracked and falling to pieces. It's a 1995 version of the M 9.21 Precor Treadmill. Do you know which version of the Precor 9.21 you have? There are a few ...

...motor cover(plastic) my motor cover is broken, it's cosmetic, but still better to have the motor covered from collecting dust. Trimline Treadmill ' eBay www.ebay.com/bhp/trimline-treadmill eBayGREY ...

...motor cover will not come off I have a Ironman Triad treadmill. I have removed the two front screws but my motor cover will not come off. If you are sitting in front of the treadmill the right side ...

...cover. Loosen motor belt tightener at top of motor mount ,remove 4 11/16 " nuts holding motor to treadmill base, remove red and black motor wires from control board. Lift motor out. Please see here ...

Removing motor cover from tr3 treadmill How do I remove the motor cover from tr3 to change the fuse unscrew the screws at the base of the motor hood

...making a loud roaring noise in front of the belt under the covered area Hello. This will be the motor bearings, without a doubt. not the easiest job to repair but I would recommend removing the ...

motor cover off to replace the motor belt. I have removed the screws in the back panel, but the cover still appears to be in a bind and I cannot find any other attatchments in the schematics. Is there

...motor hood cover. Now find the speed control that gives you the signal from the controller to your motor. Unplug the connector from the controller and replace the motor hood cover. Now plug in the ...

weight is applied I tried using the wrench and do a bunch of things but it didnt work. It sounds like the motor drive belt under the motor cover is slipping,remove the cover and check the belt tension

...motor cover There are a few different versions of the Precor 9.21 treadmill but FitnessRepairParts has a motor cover that it says is used for several of the models: ...