Electrolux EW1000i Front Load Washer "soap dispenser latch" Questions

...soap dispenser corner. There should be two holes for the cord to go into and out again. The idea is to remove the soap dispenser lid / bezel to get access to the pull cord if needed. Hear the new ...

...soap dispensor will not shut Hi – If dispenser drawer will not stay pushed in it could either be cracked or have a broken latch due to interference between the drawer front and top panel. Contact a ...

...soap dispenser bezel that connects to the door lock mechanism. You have to remove the (4) phillips screws and then you can remove the soap dispenser lid and bezel. You should be able to see a colored ...

CANNOT OPEN THE SOAP DISPENSER UP some frigidaires have a latch, otherwise just pull.

...and will not open Depending on the brand of washer , there should be a manual release either in the soap dispenser on an older Neptune or inside the bottom front panel. refer to your owners

...breaking the latch, and how to get the water to drain. Ok..... Where the soap dispenser is under it there is a green plastic string its the emergency latch opener. Pull on it and the door will

soap dispenser and pull a light green plastic cord. This worked and released the lock. But now the washer won't work. It will fill with water and the soap will empty into the washer but it won't start

...soap dispenser from the front of the machine by pulling it out and depressing the button at the back to release it. Remove the soap dispenser bracket retaining screws, using a Phillips screwdriver. ...

...30 min. and still it won't open. What to do? There is a manual release in the soap dispenser drawer I belive it is there if not check on the lint clean out door most likely your latch assby is ...

...soap dispensor, the lid of the dispenser willlift up and youll see wrapped around in there eitehr a floresent green or orange plastic wire. that is a manual release cord for the latch assy. this will ...