Electrolux Lux 5500 Canister Vacuum "full bag sensor" Questions

...bag full sensor faulty. Electrolux C104H cannister vacuum cleaner. I am searching a service manual to fix this product myself. I appear to have a faulty bag full sensor. I have replaced the bag but ...

...Full Bag sensor working, Does not Reset properly I have an Electrolux Epic 6500 SR (predecessor of Lux 7000). The full bag system works properly--it shuts down the vacuum when the bag is full and ...

Bag Full' light indicates at 1/3 bag as previous poster, with the inclusion that ours goes to full solid light from flashing light, then cuts power to the motor. I assume this is a feature to get user

Full bag system works properly, but doesn't reset easily I have an Electrolux Epic 6500 SR (predecessor of Lux 7000). The full bag system works properly--it shuts down the vacuum when the bag is full ...

...shut off before the bag is full as it is sensing a clogged bag and cannot sense proper air flow through the bag. If this persists the sensor under teh top dial may be damaged and need to be ...

...bag is not full and the vacuum is clear changed vacuum bag cleaned out sensor brush, filter, hose and tube You most likely will need to change the Yoke assembly. There is a sensor built in that gets ...

bag full light on but bag is not full Kind of messy but take the bag out and see if it goes away when you run it. It could be an obstruction in the unit and the airflow is reduced and the sensor ...

bag full light the light that says bag full does not go off. Just put in new bag. the sensor for your electrolux vacuum bag checker needs to be fixed.

...bag full light comes on and machine goes off will only run without hose attached It sounds like the valve assembly (full bag control) is faulty. Threr are two O rings inside of it and the plactic ...

...on a Windsor sensor xp12 having issues with bag full light staying on when bag is not full even does it with new bag installed it comes up from the back,it is probably plugged or the sensor is ...