Electrolux Epic 6500 Vacuum "cord rewind" Questions

...cord pulled out, the rewind spring should be very tight. The mechanism may just need lubricating, or there is a worn or broken part preventing the spring from retracting the cord, or the spring is ...

...sure but if you can get into the rewinder you can free up the cord it should go, hope this helps. Chris there is a recall on this

how to rewind the power cord assemble? The only way to rewind the cord assembly is to take the cord real out of the vacuum and rewind it and put it back in. There is no easy way to do it

...cord in the rewind spring is off track and the spring and spool will need to be reset by opening the vac. If the cord will not budge either way , by now it has likely begun to twist and tangle.With ...

...by Miele. There IS a fix to the cord rewind, unless your model falls within the 5 year warranty. In which case contact your nearest Miele dealer for a replacement to the cord rewinder. Good

rewind suddenly only takes up about 2/3rds of the cord. I tried pulling the cord all the way out to the extreme and rewinding again, but it looses spring power with about 2/3 left. May have to replace

...(4-5 inches)pressing on rewind button nothing happens....just stuck! This usually means the cord got twisted over itself. Pull it completely out and give slight resistance on cord and rewind it

disassemble to repair cord rewind This rewind is not easy to work on, I rewound my Eureka with much persistance. The vacuum shop didn't want to tackle this. It's easy to cut your fingers on the spring

cord rewind was very slow at first. I turned off the machine, unplugged the cord, and then stepped on the canister handle to activate the rewind feature. Now the cord doesn't rewind at all. It's as if

cord does not rewind The electric cord on my hoover s3639 does not wind back. Is there an easy way to fix it? If I have to open the body of the vacuum cleaner to do that, how do I open it? Where can I