Question about Maytag Washing Machines
machine will fill and run the wash cycle without issue. When it drains and then starts to fill for the rinse cycle it overflows unless you stop and stop the machine letting it fill slowly. What is the
machine fills, then when the machine is full of water the agitator moves clockwise then anticlockwise until it gets to the rinse cycle then drains the water ,then it fills for the rinse cycle but does
machine side, you will see a screen inside the washer that may be clogged with sediment. If so, just clean it out and put it back together. You may also want to run a wash cycle on cold only to see if
...fills at a trickle on rinse cycle.Whirlpool .Heavy Duty Extra Capacity top load. Thanks. You probably have a cold inlet valve with restricted flow, either because the filter on the inlet valve is ...
Question about Fisher and Paykel Washing Machines
...machine fills very slowly even though there is plenty of water supply. Sometimes the water only dribbles in. The worse time is on nthe rinse 2 cycle. Now it stops when the machine gets to rinse 2 and ...
Question about Roper Washing Machines
...just cold water so clothes don't wrinkle,try this,set the washer to just cold,start it and see if it fills or fills slowly if so you have a bad water valve on washer or no cold water going to
Question about Fisher and Paykel Washing Machines
...machine fills at full pressure. I have to repeat this for the 2 rinse parts on the wash cycle as well. What could be causing it? THIS SEAMS TO ME LIKE WATER PRESURE KEEPS DROPPING DEW TO LOW WATER ...
...machine stops mid cycle. Is there a filter that may need cleanig? I have looked and cannot find one. Thanks Washer is most likely trying to fill with cold rinse water and the inlet screen is blocked ...
...cycle. Unit should fill, wash again, and spin. If the machine never spins I will need Mgfr, model, & serial # to assist you futher if you wish to use some hand tools and repair the unit. Good
Question about Whirlpool Washing Machines
...machine trickles water out very slowly during the rinse cycle only Hi, Remove the inlet hoses and clean out the screens inside the inlet valve. Most of the time it is the cold water that gets plugged ...
843 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions