Maytag Bravos MTW6600T Top Load Washer "skips drain rinse cycle" Questions

skips threw the 1st - 3 cycles, no added water to rinse. Te clothes are fully dry like the went threw a normal cycle. If the washer is clogged, how do I reach the connection? Timer ? Are you referring

...rinse cycle to the spin cycle to get it to spin. I saw the "bad lid switch" solution if both the rinse and spin cycles do not work, but would it be the same problem if the rinse cycles do ...

Maytag bravos quiet series 300 washer fills and drains. Skips the wash and rinse cycles Probably a control board issue. Make sure drain hose isn’t too far into drain pipe creating a siphon effect.

...cycle and then it skips all the spin cycles and turns itself off leaving the water from the rinse cycle in the machine check your drain line it maybe plugged with a sock or something of that

...it onto a rinse and spin cycle has any one any ideas what the problem could be. Check the filter is not blocked it sounds as if it cannot drain in the time allowd at end of wash cycle. Regards ...

skips wash and rinse and then drains. after drains error code oL comes up. what is wrong with it. Hi jbrundage1.  I believe you have a UL error code on the washer.  It means that the sensors

...and now skipping parts of cycle (e.g. jumping from 28 minutes to 0). Suspect it is missing rinses. does not drain,does notspin drum not turning,belt intact,shown e20 at one stage,is this the

...rinse cycle. Is this a timer issue? We've had trouble in the past with the washing machine not spinning out after rinse, or clothes still soaked with soapy water after all is said and done. I removed ...

let it run through the cycle it skips the drain and rinses in the same water and still does not drain.\r\nDarcy Your lid switch is bad. There is a kit for this washer to fix that, part number 12001908