Kenmore HE2 Plus Front Load Washer "power until" Questions

...until finished it stops, and goes into dL. Will not finish load. What does this mean? Hi. the error F/dL means Door Lock Error The error is prompted when the door cannot be unlocked. Here possible ...

...power is connected to. I think the board is bad. When I turn on the washer everything works until I push start. The door locks but no water enters the washer. When I push the stop button the door ...

...power is getting to the washing machine. Is it plugged in? Has a fuse blown or is a circuit breaker tripped? Lid switch If the lid switch is defective, your washer can't spin and may not function at ...

...the Power button until the lights come on. Press and hold Start. When you hear a click, press Stop. Open door. You still have an F-28 issue but you can at least get your clothes now. Hope this

...power button until the machine resets,then if machine resets, ok. but if machine shows a fault it should give a full fault code.adrian,,,,,,, Can I have the complete Model # so I can get you working ...

...until I can fix it. How do I fix this problem? What's an inlet valve? Thanks! Hi from retired Englishman in SW France, The water being fed into the washer is controlled, via the control PCB, by ...

...power source by turning the breaker back on or plugging the unit into the wall outlet. Wait for another 30 seconds to allow the control to recognize all components. Press the Pause, Cancel or Stop ...

power and lean the washer on its back against the wall. You can prop up the bottom front edge. Remove the lower toe panel by removing the three screws under the bottom edge on the front of the washer.

...power cord. Take off the front panel (3ea -1/4"hex headscrews on bottom of panel). Get a shallow pan to catch the water and slowly unscrew the pump filter until the water fills up the pan. Repeat ...