HP LaserJet P2055d Printer "output flag" Questions

...flag in the output bin is activated. This flag moves up while the paper is making its way out of the printer and drops as soon as the paper drops into the output bin. When the tray is full the flag ...

...output bin full The printer uses a "flag" to sense paper full. As paper stacks up in the output bin it will eventually get high enough to touch the "flag". As it gets higher it will lift the flag. ...

...is a sensor flag stuck at the output bin, check for any sensor flags and free them if they are stuck, if not, it may be a more internal problem which would need to be looked at by a printer

...output bin delivery flap rises until a flag blocks the photosensor (PS911). When the photosensor is blocked, this message appears. Rotate the output bin delivery flap up and down. The flap must move ...

...flag in the output assembly that is triggered as each page is ejected. If this flag is broken, then the system will think that the output is full and stop operation. Have you done a complete sensor ...

bin full output paper remove standard There are plastic flags in the output bin that may be stuck.

...output bin, check the delivery flaps to make sure they move freely. If they do, remove the top and make sure the sensor flag isn't broken and that the sensor is connected and undamaged. If it is ...

...flag with your finger up and down. It should almost float. If it is stuck in the up position it causes the printer to think that the output bin is filled up with paper. If it is stuck push it down ...

standard out put full remove all paper from bin If you have removed the paper from the output bin at the top of the printer and the message won't go away, either the sensor is bad or the actuator is ...

...output tray. I've seen other posts talking about sensor flags, but I don't know where they are located on the printer. Any thoughts? Thanks, Charlotte Hi, I was able to fix my problem. On the left ...