Epson STYLUS R230 InkJet Photo Printer "a4 service position" Questions

...service mode, press the Power button to finish the mode, and confirm that the paper lifting plate of the sheet feeder unit is raised. 2) Keep the print head and ink tanks installed in the carriage. ...

...A4 or A3! Have taken out the paper tray and taken the rear off, so see if I can diagnose the problem. What appears to be the problem is that the mechanism that normally offers up the paper is not ...

...A4, so I set it to the proper LTR size. Powered off, then on. Now I get "adjusting. waiting to scan. Scanner light is lit and stays in home position. How do I diagnose this persistent hanging error? ...

A4 or Letter. 7. Click the Select Paper Type button. 8. Select Specialty Papers and HP Banner Paper. 9. Move the banner lever to the up position (it is located next to the paper tray). Ray Try hosting

...A4 pages when held in portrait position). Cycled power to the printer, no fix. We've run through the troubleshooter twice, no fix. We've swapped the Cyan and Magenta imaging units and ...

...A4 paper is loaded in the input tray. Press the button next to OK on the control panel display. The product prints an alignment page. Figure 1: Alignment page Place the alignment page print-side down ...

...Service test print. 2 times Green EEPROM information print See 3-4. Verification Items, (2) EEPROM information print. 3 times Orange EEPROM initialization 4 times Green Waste ink counter resetting 5 ...

A4 unused plain white paper into the input tray. Press and hold the Cancel button ( ), and then press the Start Copy Color button ( ). Release both buttons. The self-test report prints. Figure 3: Self

A4 or letter-sized white paper. Now plug the power cord into the printer and turn it on. Do the complete alignment. If the problem still persists, the unit needs service. For details and pictures, see

...A4 paper). But it run well up to 30-40 pages from the lower paper (i.e. with FS paper). Checked fixing,drum unit, wash pick up rubber,clear err through service mode almost checked every thing. Pl. ...