Question about Intertherm Heating & Cooling
...heat anticipator.This control is used to set the heat, so the heat shuts down before and in anticipation of the heat reaching its set point so it doesn't overshoot it. This thermostat will have be to ...
...so, how? No that is an heat anticipator setting that should be set to the same amperage as the gas valve o your furnace.....do not adjust unless you can tell this or you coulld ruin the
less expensive thermostats may be programmed to short cycle. If you have instructions available for the thermostat, try to find information or the "heat anticipator". It may have an adjustable setting
Question about Rheem Heating & Cooling
...heat, some Thermostats have an anticipator setting for the gas valve. If it's set wrong it will effect the on/off cycle of the gas valve. All duct work in non heated and a/c spaces, including inside ...
R and W, if the W is on C you are shorting the heat anticipator in the thermostat. If the unit is wired right look for a spot where the wire is rubbed thru and touching the metal housing of the heater
Question about GE Heating & Cooling
electric heat mode, as the regulator heat pump works good. The part may have a time or temperature delay that is too long for you. Also if it has a remote thermostat, check the heat anticipate setting
Question about Hunter Heating & Cooling
I assume the new thermostat is digital. If it is not digital the heat anticipator must be set. If that is the case let me know and I'll give you instructions on how to set it
HEAT THROUGH THE DUCT AND VENTS. ALSO CHECK THERMOSTAT ON BOTH MODELS FOR CORRECT OPERATION..THEY MIGHT NEED REPLACING.. ALSO CHECK YOUR ANTICIPATOR RELAYS AND CHECK ALL BREAKERS TO MAKE SURE THEY ARE
...needs to be set for longer cycles... on older ones you set the heat anticipator for longer cycles and on new t-stats you have to go into the program and set them for electric heating... ...
9 questions posted
Usually answered in minutes!
5 Questions
3 Questions
3 Questions