2008 Nissan Altima "changed break pads breaks" Questions

break job? My girlfriend took her 2005 Nissan Altima 4 cyl to a mechanic to have the breaks replaced on the car. The mechanic replaced the breaks wih a total cost of $150.00 w/labor. The mechanic told

changed all four rotors and brake pads on a 2003 Nissan Altima. Car drives smooth and brakes good except I am getting a pulsing feedback from the brake pedal. Any suggestions on what this might be? It

pads. o Tip: To break in pads and rotors refer to manufacturers recommendations. Some companies have different procedures for pad and rotor break in. Hope this helped (remember comment and rated this)

...changed (This means that your mechanic should bleed the brake system by opening the bleed screw on all (4) brake calipers). Brake fluid absorbs moisture over time and will start to break down (Lower ...

...changed brake pads on motorcycles before but never on a car. Thanks. Well the first thing U need to do is clamp off your break line,{u only have to do this if it has abs}which that year.then you nee ...

...break pads 1.jack up both tire.2.remove tire.3.unbolt break caliper.4.remove old break pads and take cap off break fluid.5.use pliers or c clamps to push back in caliper to sit ffush.6.install new ...

...BREAK PADS NOISY I HAVE BOUGHT A USED POLO 1.4 FROM MCARTHY IN DURBAN AND MY REAR BREAK PADS ARE NOISY. WHO IS RESPONSIBLE TO REPLACE THEM ALTHOUGH I HAVE AN AA FORM SHOWINH THAT THE BREAKS WERE ...

Cannot dis-mount the drum to change break pad Try to change the break pad, but the drum cannot be dis-mounted. The drum is loose, but it seems that there is some mechanism to prevent it come out. Is ...

changed the back two and now the front break pad is completely out on the left side and it scratched up the rotor real bad. I cant seem to unscrew the back piece holding the break together. can anyone

...pads. did you turn the break setting all the way in when you installed new pads.if you didnt adjust the breaks then your breaks are pushing to far out and not returning properly.adjust the pads with ...