How do I know when my camshafts are top dead center the outter timing pulley was loosened stupidly before we could mark anything Not to worry. The cam gear has marks on it already. When ...
Question about Hyundai Elantra
1.8 j2 engine oil leak on front crankshaft seal, do I have to strip the engine to replace this The front of the engione must be torn down and the cam belt removed.
...a new timing belt, new idler pulleys , new hydraulic belt adjuster if fitted , new oil seals on the cam shafts and crank shaft ( oil reduces belt life by more than 50%) replacing all these items is ...
Question about Hyundai Elantra
...that has poor compression, but minimal leakage, usually has a valvetrain problem such as a worn cam lobe, broken valve spring, collapsed lifter, bent push rod, etc. If all the cylinders have low ...
cam seal leak how to fix cam seal leak on 1999 subaru legacy Replacing the cam seal is really more time consuming than difficult. The EJ-25 motor requires the removal of front covers, timing belt, and
Question about Hyundai Elantra
...seal ? The seals never have been change Me personally I would leave them , on high milage cars once u desturb them u might not get them to seal again as cam might be worn . Don't fix what's not ...
Question about Hyundai Cars & Trucks
...cam seal and cover. immediately got new dtc p0016. its a pretty simple job cant imagine i messed something up cam seal that doesnt have anything to cause a p00010 code vvt --oil sludge cam --crank ...
Question about Hyundai Elantra
...dry now no leaks do you think cam may have a ridge on them and cut new seal ? The seals never have been change I would for high miles. Also would sand cam shaft with fine grit sand paper. 1000
...seal got a link behide the timeing belt Don't quiet understand your question...but here's some insight. The chain is under the valve cover/s ( 1.8t and some 2.8 V6.) and drives 2 or 4 cam shafts. If ...
...seal, remove the old cam shaft bearing cap seals. Replace the bearing cap seals and the valve cover seal and replace the cap and cover. Tighten the bolts to about 30 lbs and that should resolve the ...
177 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
493 Questions