...fax line ext. What am I doing wrong? FAX RECEPTION THROUGH AN ANSWERING MACHINE: This mode is recommended for a shared fax and telephone line. To receive a fax if your All-In-One is connected to an ...
Question about Lexmark X Office Equipment & Supplies
...line as your fax:To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a greater number of rings than the answering machine. For example, ...
...line and two numbers.....) then set double ring for fax and single for Phone or answering mech....or vice versa... This Worked on my x5470 and i'm guessing x5495, it would send faxes but wouldnot ...
Question about Lexmark X Office Equipment & Supplies
...fax line Your All-In-One automatically accepts incoming faxes using the automatic answering mode. When the Auto Answer light is on, the All-In-One receives a fax after the specified number of rings ...
Question about Lexmark X Office Equipment & Supplies
...line as the fax, set the answering machine to answer incoming calls before the printer does. Increase the number of rings by a factor of 3 over the answering machine. For example, if the answering ...
Question about Lexmark X Office Equipment & Supplies
...fax line is plugged into the Line port on the back of Lexmark printer and not in the Phone port. If you have an answering machine connected to the same line as the fax, set the answering machine to ...
...with DSL. Make sure the DSL line filter is applied correctly. It will be clearly marked Phone or DSL line. Do NOT connect the phone/fax line into the DSL line connection. Hope this helps! Good
Question about Lexmark X Office Equipment & Supplies
...fax line is working. To check, insert a telephone device straight to the fax line. You should get a dial tone. Make sure the telephone cord from the phone jack in the wall is plugged into the Line ...
Question about Lexmark X Office Equipment & Supplies
...Fax mech(Line Jack)... Problem Receiving-- Make sure ur answering Mech rings are set more than the fax mech...i.e (if ur answering mech is set to 3 then fax mech should be set to 4).... If u r using ...
...line as the fax, set the answering machine to answer incoming calls before the printer does. Increase the number of rings by a factor of 3 over the answering machine. For example, if the answering ...
249 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions