Haier 20.5 cu. ft. / 580 liter Upright Freezer HUF138PA "door gasket" Questions

...it. You might need a hair dryer to soften the gasket if it was deformed during shipping. If you have a newer, press-fit style gasket, just yank it and press the new one in... Door Gasket ...

...gasket" The door has a track around the inside edge. The gasket has an arrow shaped line running all along the back of the gasket. This is pressed into the channel track on door. It is relitivly easy ...

Door gasket I have good door suction but high frost build-up at interior center top coil. Do I need to replace or adjust the door gasket? Try putting vaseline on the gasket. You are not getting a good

...at the bottom of the door per the owners manual, but it didn't help. you could use a hair dryer to attempt to remold the gasket to the door other than that i think you would have to replace the ...

...DOOR GASKET SEAL FREEZER DOOR Hello Jerry; My name is Peter. I am a retired field service refrigeration technician. You need to provide a model number for me to give you the gasket part number and ...

...door gasket. I recommend that you visually inspect the door gasket for defects such as gaps or tears. You can also use a dollar bill to test the door gasket. Place a dollar bill in between the door ...

...door gasket and the freezer body you do not have a tight seal. Repair - Recondition the gasket. Wet the door gasket with water, with a hairy dryer heat the gasket while genteelly pulling the gasket ...

door gasket for defects such as gaps or tears. You can also use a dollar bill to test the door gasket. Place a dollar bill in between the door and the body of the freezer. If the dollar bill pulls out

...door gasket on a 25 year old freezer. It is a Kenmore 6. Upright. It does not seal tight anymore. Is the door gasket torn?? if not try cleaning the rubber surface that makes contact with the metal ...

...door gasket becomes crushed over time or the door is so thin it becomes deformed. Do not try to replace the door gasket. You have to soak the new gasket in hot water for 1/2 hour and then form it on ...