Jura Capresso Impressa E75 Espresso & Coffee Maker "restart machine" Questions

Cannot insert the tray all the way Remove tray and replace leaving out the used grounds box. Restarting the machine resets the brew unit and the tray with coffee grounds box can now enter fully

...a problem where it constantly comes up and says clean machine. Even after cleaning the machine when restarted it comes up with clean machine. Also the drawer continues to pop out do you have any ...

shut down the machine, unplug it and wait for 1 min or so. then plug it back in and restart the machine. You should hear it go through the reset and then you should be able to push the drawer back in

...system" continuously. Please help what do I do?? I have rinsed the system several times. I have restarted the machine. I have tried warm water in the Water tank.I have switched it off for a day.

...If I shut the machine down and restart it, it indicates that I need to descale as if nothing happened. Hi Mr Don i so happen to have this same problem with my Jura please advise on your solution ...

...restart without the problem noted above. I just called the company with the same problem today. They will fix your machine for free. They have recalled this machine. Call them and they will tell you ...

...restart the machine - spanner appears on the screen. Restarting the machine makes no difference Please help I suggest the spanner is telling you there is a fault, so you will need to get it serviced ...

...machine says restart to solve the problem. But restarting it doesn't solve the problem. It first says dispensing failed then the restart to solve the problem appears. I restart it and it does nothing ...

...a coffee, the machine starts working and then stops working completely turns off, I have to restart the machine and wait until it's ready for it restarted once more, what could be the

...restart the pot and make a coffee. This machine has had 4 flow valves....Any suggestions? I have 2 also and I use good water but I set mine on the max (all the lights lite) I use to work on these ...