Jura Capresso Impressa E8 Espresso/Coffee Maker "machine weak" Questions

...weak coffee. Coffee blend not well distributed on filter basket. On Espresso machines: Check water temp, same as filter coffee machines (thermostat element, scale on heating chamber). Ensure that ...

weak coffee HI, I have recently bought a jura impressa x90, a used one. It was displaying "malfunction 8" when I bought it. I have rectified that problem, as the brewer unit O ring was dislodged and ...

Weak espresso HI, I have recently bought a jura impressa x90, a used one. It was displaying "malfunction 8" when I bought it. I have rectified that problem, as the brewer unit O ring was dislodged and

...weak coffee over time? Does it need cleaned really well with cleaning caplets or does it need to be taken apart and cleaned or anything else? You should probably run a cleaning cycle with a cleaning ...

machine - J6 Capresso, the problem was caused by a crack on one side of the grounds scraper, a plastic paddle attached to the side of the brew group. The scraper is supposed to detect when the tray is

...weak coffee, as my 5-year-old suggests? Nothing works to stop it except turning the machine off. Apparently after a few yrs of use the steam wafting up from a cup of coffee works its way into the ...

I have a Jura Capresso Impressa S9 and it keeps saying empty tray try this:clean with brus two metal contact on drip tray Where the contacts attach to the drip tray on the inside is where I had some ...

HI, I have recently bought a jura impressa x90, a used one. It was displaying "malfunction 8" when I bought it. I have rectified that problem, as the brewer unit O ring was dislodged and was ...

...weak Using strong robust setting. Result of grind is same as my counter top grinder that produces good results in machine. According to the manual the grind-time should be 8.5-9.5 seconds and I'm ...

...weak. Looking at the puck they are very wet and coarse - the grounds are large grit-like in size which is definitely not right. Is there a way to reset the burrs so they are closer together as they ...