Jura Capresso Impressa F9 Espresso Machine "tray back coffee" Questions

Ad

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

2 Answers

...back of the machine Place the tray into the coffee maker without the basket and run one cup of coffee Replace the basket into the tray. It will now fit. I emptied the coffee tray (3 parts) and tried ...

Ad

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

2 Answers

...tray back. The coffee machine started the cleaning process again and it finished. I think the problem was emptying the dirty water in the tray through the back instead of the front; something must ...

Ad

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

1 Answer

...back of the tray. Be sure they are cleans as well as the plastic space between them. Then using compressed air clean where the contacts enter the machine in the rear. Usually there is moisture back ...

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

3 Answers

...went away when I put the tray back in. Empty Tray, Missing Tray game: Cool down the contacts on the tray with cold water, then put it in wet and wait a few seconds for the sensors to cool down.

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

1 Answer

...bottom tray back in now. Turn the machine on, let it run through the start up process and when completely stopped see if you can now remove tray and fit the spent grounds bin back where it should

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

1 Answer

tray it will go back to select coffee on the menu. FYI - there is like a built in timer for the tray removal - I believe it will tell you what the timing is in the booklet - howver it works best to do

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

2 Answers

...Container as it is the component that usually catches against the scraper. The machine should then cycle and revert to its normal position where it will be possible to put the complete tray back

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

3 Answers

...tray to go back in. There is a metal blade that is down in the tray area that I dont seem to remember being there. This is because the machine didn't run the full cyce or the tray was removed while ...

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

6 Answers

...tray back in to the machine with the paper towel on it and then pull it back out. The paper towel will clean the slot inside the machine. According to the Instruction Manual section 21 page 68 when ...

Question about Jura Capresso Impressa Coffee Makers & Espresso Machines

1 Answer

I can't get the tray back in I can't get the tray back in Remove the grinds container than put it in, rinse or power cycle the machine and it will be sorted out.

Not finding what you are looking for?
Jura Capresso Impressa F9 Espresso Machine Logo

167 questions posted

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...