...upright freezer use a carpenter's level to level the freezer from front-to-back. Adjust the plastic leveling feet in front, 1/2 bubble higher, so that the door closes easily when left halfway open. I ...
Question about Kenmore Freezers
...Upright Freezer 24092: My freezer door will not close flush. The bottom ... My freezer door will not close flush. The bottom is flush but as it gets towards the top thedoor will not close. I can't ...
Question about Frigidaire Freezers
how do you adjust a Westinghouse 2 dooe refrigerator door To adjust a door on a westinghouse refrigerator Loosen the top hinge screws. Pull up on the door to where you want it. While holding the door ...
Question about Kenmore Freezers
...Upright freezer-the door does not have the suction anymore Our freezer alarm has started going off. We noticed the door does not have any suction anymore either. The meats are turning brown and the ...
...upright freezer freezer seems to not have a tight seal and food thaws Check the door sits straight and square on the front. You can "adjust" with the heel of your hand to make it sit flat against the ...
...doors hinges/supports. Loosen the bolts of abnormal level door, adjust the level and tighten the bolts. If it is not work put a metal sleeve on support shaft ( It may wear down already) I think that ...
upright freezer only 3 years old running ,no clicking noise, no ice build up but won't completely freeze although set to 7 (lowest temp) check door seals, also check vent direction, a dial or lever in
...shut tight You need to order and replace the door gasket. Also check and be sure there the hight adjustment is correct, meaning the door is centered on the opening and not off set to where it can ...
upright freezer. The door does not close tightly, enough with extra pressure from me. Is there a solution or is it time for a new appliance? You can try replacing the seals and or adjusting the hinges
Question about Kenmore Freezers
upright freezer that runs constantly( Model 2539206281). It has a manufacture date of 1991. It has been in storage most of its life. I know the door seal needs replaced but I wanted to see if it still
121 questions posted
Usually answered in minutes!
188 Questions
75 Questions
44 Questions
34 Questions