Kenmore 30 in. 42701 / 42702 / 42709 Electric Cooktop "burners work" Questions

My electric stove top burner only works on high I have an older GE Stove top burner that only works on high This is for the glass top units. well i'm not sure if your problem is with your large or ...

...burners still work good as new. The 2 mid sized burners do not work at all - no gas flows to them. The large Wok burner does have some gas flow, but on the highest setting is produces a flame like it ...

...burners connect to at the back of the burner unit? The smaller burner appears to work fine. Based on the symptoms described, it is possible that the issue lies with the ceramic element that the ...

my large burner at the front does not work, yet when i replace it with\r\nthe large burner at the back it does not work , yet when you put the front burner at the back it works. Your front burner is ...

...burners. The others seem to work o.k., but are slow to ignite....sometimes I have to turn the knob on and off 2-3 times to get it to work? Any suggestions....the burners are all clean and it is not ...

Jenn-Air JED8345 one burner does not come on Jenn-Air JED8345 (3 cartridge cooktop unit) far right front burner does not heat but back burner works okay. The light turns on when swtich is for the far ...

...block to be worn down and making very poor contact with the burners and thus their is power at the blocks and yet the burners will not work 2) the burners their  self are ...

...the 5. I have a GE Profile JGP636 Hi, Here is a tip that I wrote to give details about why your cooktop will not spark to light the burners.. Cooktop Range Stove spark ignition does not work ...

...burners from the other side and it works so the igniter is not at fault. I have used a pin to clean the holes but apparently not good enough. should I replace the burner? Try running the burner thru ...

...burners will not work, there is no gas or spark for those two burners. All other burners are working fine. Can you help with an answer Did you get an answer on this? Have the same problem and the ...