...the toilet to flush. If the flapper closes too quickly, it will take away from the powerful flush. Try to find the correct flapper for that type of toilet and stay away from the "universal"
...flapper valve opens and toilet begins flush. As soon as the flush handle is released, flapper closes, resulting in a "no flush" condition. Flush handle must be held down for complete flush. ...
...up and no one flushed. push down on flapper to see if you here the water stop leaking out. if so replace flapper. even if toilet is 1yr or less old. could be a bad flapper. hope this helps. duane
Question about Crane Plumbing Home
...handle down until almost all water is out of the bowl. adjust the flappers-- either adjust the length of the lift line-from flapper to handle and or the flapper itself not properly mounted on tank ...
...toilet, flapper doesn't stay up long enough to flush When I push down the handle, the flapper doesn't stay up long enough to flush the toilet. is there a way to make the handle to press further down? ...
...toilet does not flush clean. It appears to not be using enough water quick enough to give a clean flush. The tank level is just above the white line on the over flow pipe level so there is enough ...
...toilet flapper opening Steps: Look inside toilet bowl under rim and see holes where water comes out Use brush and apply CLR to holes where water comes out. Use pumice stone to scrape ... pumice stone ...
Question about Duravit Home
...toilet was installed 2 years ago. The other toilets in the house flush perfectly well (different type) Look inside the tank under the lid, it sounds like the flapper that lets the water into the bowl ...
Question about Home
...flapper and the toilet still flushed on it's own! I noticed that the flapper chain got often stuck when the flapper lowered down, which caused water still running out and than I came up with my own ...
...flapper is pushed down too far on the vent tube. leave about 1/2 inch of space between the bottom of the flapper flange when you seat it over the vent tube. make sure the flapper is level. if the ...
77 questions posted
Usually answered in minutes!