The speed lever of my KSM90 will not stay off. To get the housing off, I have removed the rear housing, the metal band, and four screws under the housing, but the housing will not come off. Is there ...
...remove them, and then the cover. At the top-front of the mixer you'll find the transmission housing. If this housing is made of plastic, check it carefully for cracks in the housing or near its screw ...
Remove the brush caps on the side of the motor housing and check brushes are not worn out, note they are keyed and only fit ONE way. If OK remove back cover and with a multi meter check for continuity
...housing (it's just press-fit). Using 3/4" wrench, remove acorn nut and locknut from bottom of main shaft (hold on to the housing, it's gonna drop down and it's HEAVY). Using flat screwdriver, remove ...
...housing above where the moter turns is comming apart Hi. Remove the silver band from around the mixer head, there should be 4 screws that hold the cover on. Tighten them and install the silver band ...
...housing where grease can be checked or introduces. Remove this plug and carefully introduce a tool such as a wide flat screwdriver to 'lock' the gears from turning. The nylon gear and 'isolator' ...
remove the chrome cover from the black body of the mixer .... CAREFULLY.... insert the tip of a medium flat-blade screwdriver along the seam of the circular chrome disc on the front of the black motor
...remove planetary, back cover off, black wire and white wire off the control board (both on the same side at the bottom) undo 5 screws under planetary, undo 4 screws remaining in housing underside. ...
housing. If out of warranty, unplug the mixer and don't use it. Remove the silver band from around the head of the mixer, then remove the four screws that secure the cover, remove it. At the front top
457 questions posted
Usually answered in minutes!
493 Questions
285 Questions
205 Questions
183 Questions
89 Questions
