KitchenAid KHMS155LSS 1000 Watts Microwave Oven "vent grill broke" Questions

...broke in the socket. I don't know how to remove it. The cooktop light bulb(s) is(are) located on the underside of the microwave oven, and is(are) replaceable. Remove bulb cover screw, and open the ...

...at the top Two screws on the top of the grill can be removed, then the grill pulls straight off. Caution - I broke the tabs on the grill where the screws hold metal tabs - $98 for a new grill!

...vent grill on the top of the oven above the door. There should only be a couple of screws holding it in from the top. The grill then should tilt out from the top first then from the bottom to remove. ...

broke off. I have the same problem- funny when we built we went all Maytag and got a bunch of lousy handles- the stove, micro, fridge, and freezer... I glued the pieces of the handle together and used

grill and can see the hinge in there, but the black plastic vent guard is in the way. Even after removing all the screws I can see, I still don't know how to get that black plastic thing back in place

...vent grille. I set the door carefully on it's side so I thought but a small little plastic piece broke off where the door latches. I thought about using some really strong glue to glue the piece ...

...vent for any blockage. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info at our site, which is linked at our listing here on FixYa: ...

...vent grille at the top of the microwave (2 screws) and lift it off. The door then lifts up easily, off its mounting. The first step in disassembling the door was to pop out the plastic bezel that ...

...vent. 3. Plug the microwave back in. 4. Make sure neither you nor anyone else reaches in behind the control panel. There will exposed high-voltage connections. 5. Put a few cups worth of water in a ...

...broke. (2) Used oven and gas stove to heat house for 2 hours. (3) our GESpacemaker Microwave's non-vented, ductless fan turned on automatically frm gas/stove heat (4) after about 1.5 hrs, the whole ...