KitchenAid KHMS155LSS 1000 Watts Microwave Oven "remove kitchenaide door" Questions

please help, Thanks. On most new MW ovens, the door will lift off the hinges once the top grille is removed. There are two screws on the top that hold the grille in place

...door spring broke. How do I replace it? Remove the front panel by removing the screws located on the inside of the door (note hold door inplace, since it is heavy and will fall out after screws ...

...KHMS155L Here's a diagram of the door. On the inside of the door is the frame, #2. This can be removed very carefully with a small flat bladed screwdriver and work slowly around. The frame is ...

...open button has worn down too far to work. On a counter top model, the outer cover will need to be removed to diagnose and repair this. On an over-the-range model, usually only the control panel ...

remove the backside door panel to access the scews securing the handle to the door. with most microwave ovens, for safety reasons... they are permanently sealed to prevent microwave leakage burns... i

...remove the microwave door? Any help would be greatly appreciated. There are indeed two springs that "cross" each other, and they must be both be replaced to ensure full strength. Normally you have to ...

...remove door on KitchenAid microwave YKHMS2050SS-2 in order to replace the CTRL-ELEC control card inside the door? Control pad presses its own buttons, per other comment made on this site. Trying to ...

remove kitchenaid microwave model kemc308ksso door to replace spring Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you

...remove door but no avail on disassembly. tried one method with putty knife on a similar oven i found on this web site. No info from kitchenaid on this problem other than to schedule service ...

...remove the inner door however this is my big hurdle. I am pretty sure the screws holding the handle on are located on the other side of the inner door. I cannot seem to figure out how to remove the ...