...toilet tank flapper with float 'ball". Cut the rubber ring piece away from the flapper and you don't need it (see cut here marks on flapper). Install flapper and adjust the float fairly close to the ...
...toilet is done flushing and needs to fill...it gets to the fill line and goes too high so that it is continually filling. we cannot seem to find a way to properly adjust it. Bend the float ball down ...
...how your valve is shut off and either change the big round float or adjust the clips on the rising one. Just keep the level below the overflow and the flush handle to avoid a running toilet or a
Question about Delta Home
...float valve several times but is still ghost flushes. How can I stop this? follow this steps and fix it. God bless you f the toilet bowl overflows, use a plunger or auger to eliminate clogs. If the ...
...toilet Leaking to drain? Adjust float height to keep water below overflow ... or change flapper if it doesn't seal. Leaking to floor? Check either end of supply line; or check seal between tank and ...
...toilet. flapper most likely needs to be replaced not sealing completely is one problem----- the other is float level not shutting off water valve --and other is bad water valve not shutting off or ...
...toilet solution 1 1. tank the tank lid off. 2. flush, the rubber thing that comes up and allows the water to go to the bowl is the flapper 3. remove 4. replace that should fix it. problem 2 it could ...
toilet is constantly running. Seems that tank water is seeping into bowl causing the mechanism to demand more water. Onl way to stop is to turn of water valve until we need. Before I call a plumber is
...toilet runs even when the bowl is filled? What can we do to fix it. There is either a screw on the top of the fluidmaster, or the float can be screwed out further. If it has a screw on top of the ...
2 questions posted
Usually answered in minutes!