Sharp R-1480 Microwave Oven "table stop turn door open" Questions

...watts microwave manual not working as designed when door is closed the turn table starts turning and only stops when door is opened you can not set a time They is one of the DOOR SWITCH need to ...

...turn table does not turn. Clock works, Timer works. Hi setting and defrost buttons work, but when we press "Start" light comes on and timer starts counting down, but turn table will not turn and ...

...ago off and on but now it's all the time. Is it dangerous? Does the turn table ever stop? If not you need to either replace the oven or have it repaired, it is likely cheaper to just replace

turn table turns for approx 30 seconds. After 30 seconds it stops and makes a clunking noise, if you open the door and manually turn the glass plate 1/4 of a turn and then restart the turn table turns

...table runs when not in use. I looked in the paperwork that came with the product and it does not list this kind of problem.. only if its not truning .. mine wont stop. It does stop if you open the ...

...table spinning when plugged in and door shut. This will not stop unless door is opened. If you wish to get some details about microwave oven repair; check the site linked here. Pull up older posts. ...

...table and all... This is usually caused by either a bad door switch, a loose door switch mount, or a problem on the control panel. Even though a door switch clicks, it may still be bad inside. This ...

table stopped, still running and stop/cancel button on keyboard won't work while in process. Only way to shut down is to unplug or keep door open. When plugged back in, allows the resetting of

...stop button, the fan and turn table continue to run. When I open the door the fan and turn table stops and the light comes on. If I closed the door the fan and turn table come back on. I have check ...

...fine when door is closed, and turntable stops when done or not being used. Almost as if the turntable is tied to the internal light. Bad Door switch, back feeding power to turn table motor ...