...door latch). Note that the fan and surface light do work as does the clock. Previously the magnetron fan would turn on when the door was opened, but the magentron was not running. The unit would heat ...
...latch on the door seems to have broken off and I'm not sure when that happened. Could that be the problem? If so is that something I could replace myself? Thank you in advance for your help. sounds ...
Question about Microwave Ovens
...door latch, the oven may think that the door is not closed properly and will not heat. It's a built-in safety feature to prevent exposure to microwave radiation. If you can determine the problem with ...
door latch hook broke on bottom, when closing microwave door microwave comes on so door has to be left open or microwave unplugged, does not seem to heat however...will replacing the door latch hook ...
The door will not open with the latch. If I turn it on, it counts down; however, it does not heat. door latch must work or the oven wont
door latch assembly F-C or F-0 Communication error between boards Replace the relay board. Frigidaire-Westinghouse-Tappan-Gibson Oven Fault Codes: F0 & F1 EOC failure Replace EOC F2 Oven over heat
...turntable doesn't turn, but the fan and lights run. What could cause this? When you close the oven door the latches operate a couple of interlock switches that control power. It may be that one of ...
door latch with an original part. If it is working but not heating, then test the high voltage capacitor,the rectifier diode.or the magnetron. If all this are fine, test the control board.If turntable
Question about Kenwood Microwave Ovens
Found a broken door latch. Is that the trouble? If you had a broken latch,that latch was not closing a switch that needs to be closed to tell the unit it is safe to run. So yes start with broken latch
368 questions posted
Usually answered in minutes!
129 Questions
117 Questions
86 Questions
95 Questions
78 Questions