Sharp R-930AK Convection/Microwave Oven "motor" Questions

Change Motor but turn table does not turning? I did change Motor due to Loud buzzing noise, but turn table does not turn? test the following steps and fix it. God bless you Turntable Motor If the ...

Panasonic microwawe turntable stoped turning there is a motor under the underside of the microwave these motors can clog up. try turning the motor to by hand a few times so it makes a werring sound. ...

tray rotation motor does not work Replacing the turntable motor. The motor assembly is fixed to the base of the oven usually with two screws and access i obtained by removing the inspection plate ...

Tecnowind DTA01 motor not working Check the motor for free running with an external voltage, check if the motor is jammed, if so remove to free with lubrication with light oil. if not the motor is ...

turntable not rotating turntable makes noise while barely rotating HI, the turntable motor is weak and failing at this point, simply replace this damaged motor. this will eliminate this distraction. ...

...down of turntable ,check the internal fuse for the turn table if replacement is necessary , the motor is about $ 35 dlrs,some are cheaper on Ebay just enter your Mod # hope you have good luck

microwave mod# MMV4203DQ00 - turn table does not turn Sounds like the motor is faulty. Replacing the turntable motor. The motor assembly is fixed to the base of the oven usually with two screws and ...

question re: installation of turntable motor Hi. Have a GE microwave model #JVM1640WB007. Turntable quit, bought new motor, installed it. Everythink OK EXCEPT--I can't remember which way the wires ...

need to replace turntable motor So, do we have to get the exact model number, serial number for this motor -they all look the same--at least the ones I am looking at. we have a JVM 1842 BD 001 hi, ...

don't turn the dishe don't turn the plate there are 3 things that can be wrong 1st the stepping motor under the plate could be broken the motor is made up of lots of plastic gears to get to it you ...