Sharp R-930AK Convection/Microwave Oven "blows fuse turned" Questions

...BLOWS FUSE EVERYTIME I TURN IT ON the fuse blows only when there is a short and it is overloaded, so check it for shorts before replacing the fuse and turning it on!! once the short is cleared the ...

...blows the fuse when turned on new fuse is installed turn on microwave makes a noise fuse immediately blows The transformer that makes hi voltage for the Magnetron tube is causing the fuse to blow. ...

...fuse blows. Can you give me a list of things, to look for, that can go wrong, when the fuse blows, a blown fuse is a dead short of the circuit it could be a failed power board , control board , ...

...fuse blows everytime you turn on cook if you turn on cook power fuse blows immediately....if you turn on fan,lights,clock etc everything else works The magnetron is shorted or the inverter board is ...

...blows the 20A main fuse. Here are some details: - Yesterday I noticed that one of the smaller fans inside would not turn off after using the microwave. It wasn't the main exhaust fan. - Also, the ...

...fuse blows. I am thinking there is a short or malfunctioning mangetron. Does the magnetron need to be replaced? Any input would be greatly appreciated. It appears like the high voltage capacitor is ...

Blows fuse when microwave is turned on. Blows fuse when turned on. It is shorting in some manner and needs to be looked at to tell for sure.

...fuse blows again. Is there a short in the magnetron and will I need to replace it to avoid the fuse from blowing again? couple questions - what else is on the circuit, and what current does the oven ...

...blows fuse when turn on If it is blowing an internal fuse it could be a lot of things. -short in the motor -short in one of the other components - gunk/dust could be causing a short If it is your ...

...working. Replaced fuse. Fan and clock works but when the microwave is turned on, it blows the fuse again. What do I check next? The HV diode in the power supply for the magnetron is probably