...washers holding it sink. Tighten them up. Some have a bolt or nut in the middle requiring a socket to tighten. If the spout is loose remove handle and it has a plastic ring on top to tighten spout
...loose causing it to rotate off center. I would assume there is some type of tightening mechanism on the underside but have a difficult view because of the disposal. Can you help me? there is a couple ...
...or a loose nut. Tighten everything up, and you might think about running some silicone across/around the joints just to make sure everything's all watertight, then reconnect and try it
...loose-er fit when re-used. The Teflon tape can take up the space by adding a couple extra wraps on the threads. And before attaching the new head, paint a light coat of pipe thread compound on top of ...
...loose where the faucet meets the granite. I've looked underneath and do not something that looks like it could be tightened other than a rectangular plate that is notched for the pullout hose and H ...
loose - I have looked under the sink and there is no brass nut - there is a brass u-shape plate that the water lines go through but no nut to tighten. I believe that I need to access some nut throught
11 questions posted
Usually answered in minutes!