Delta Model 473: Saxony Kitchen Pull-Down/Out Faucet - Venetian® Bronze "39 tighten faucet sink" Questions

Ad

...3/4". It's almost impossible to fit a wrench up there to tighten it. there should be a brass nut where the pull out connects to if you tighten that it should tighten it down to your granite ...

Ad

Question about Price Pfister Plumbing

1 Answer

...tighten back down carefully so that the connections are not stripped and its not too tight. Make sure it moves as desired, turn the water back on. If it doesn't move after the main nut is loosed, ...

Ad

Question about Danze Plumbing

1 Answer

...39;m just installing the exact same faucet and I found that the side to side motion was binding if I tightened the tap too much from the bottom with the nut & "c" shaped clamp with the 2 set ...

...39;t seem to come apart to find the washer. If you faucet is leaking, try this simple step to see if it will stop. First, turn the water supply line off under the sink. Next, open the valve that is ...

...tighten the base of kitchen faucet? grohe You need a "basin wrench".  Ask at any hardware or home improvement store.   They are $11 at Home Depot.  The hard part is crawling on your ...

Question about Moen Plumbing

1 Answer

...39;ll find a broken gasket or a loose nut. Tighten everything up, and you might think about running some silicone across/around the joints just to make sure everything's all watertight, then ...

...tighten there. Do I need a new faucet, this one is 5 years ol there is a chance that one of the internal seals has worn possible do to a build up of calcium from water. what type of connection do you ...

Question about Newport Brass Plumbing

1 Answer

...turning the faucet on. If it's a loose nut it will spin freely. Tighten it. If it is a clip you may need to play with the stem/cartridge to align it properly before the clip will move into

39;t refer to the plastic type drain fixing. The sink basket/strainer that fits into the large hole of the sink should have either a bead of silicone sealant applied to the sealing lip of the assembly

...39;s in place, tighten the nut back. The nut should be tight, but not too tight or the drain with be hard to open/close. Hand tighten it only, don't use a wrench. A common mistake is to not have ...

Not finding what you are looking for?
Delta Model 473: Saxony Kitchen Pull-Down/Out Faucet - Venetian® Bronze Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Delta Plumbing Experts

john h

Level 3 Expert

29490 Answers

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3806 Answers

Are you a Delta Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...