...date "quick set". Pull crown out just a wee bit to position #1. Turn counter clockwise to advance date. Pulling out the crown to position #2 stops the watch and sets the time. Pull the winder all the ...
...set day/date. Turning the stem one direction will advance the day and turning it the other direction will advance the date. Position C: Used to set the time. Some watches will "hack," a term used to ...
...set time or date. What am I doing wrong? Are you aware that the crown is threaded and it needs to be unscrewed and pulled out once to adjust time and twice to adjust date Tag Heuer uses brass coated ...
Question about Tag Heuer 2000 Watches
...to set time Can't figure out how to set time and date on aqua racer 300 meter watch by tagheuer try this link below ...
...date, time, etc. then use the start button to move the time try pressing and holding the reset button. the display should start blinking and the other buttons, mode i think, will move you around the ...
cannot set the time and date on the Multigraph WK111A. the anologue part is ok http://www.tagheuer.com/_documents/manuals/EI2254_en.pdf
date, as is expected, then I went on with my day. In the middle of the day, I was surprised to find that it wasn't moving. I checked to see that the crown was fully screwed in. And I even set the time
...date setting position. Further pull of crown will set it in time setting position. Try to pull the crown till you get it in correct date setting position and change the desired date. Do not use the ...
...set the date and day, pull it gently again a second time and you can set the time. The proper way to set the time and date is to set first the day,date late at the actual date, then move the hands ...
...set to change date at day time. check it your date turns during 12 noon, if yes move the hands clockwise until you set your time and date on sync. say you want to set your watch date:10th and ...
24 questions posted
Usually answered in minutes!
21 Questions
28 Questions
11 Questions
17 Questions
