Maytag Neptune MAH7500WH Front Load Washer Logo
Posted on Aug 01, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Leak well after completion of wash cycle - Neptune Front Loader

The plumber couldn't figure it out but perhaps you can. Periodically and well after the MAH5500BWW completes it's wash cycle (e.g., after 11PM and before 7 AM) there is a water leak (about 1/4 to 1/2 gallon) that seems to be coming from where the drain hose fits in the drain. There is enough pressure to spray an appliance that is next to the washer and the back of the washer -- at the same level as the drain pipe opening. This just occurred while we were on vacation, had the water feeds turned off, and verified that there was no water leak after using the washer. In fact, it would appear that it leaked multiple times during the period we were gone given the amount of water. The washer appears to work great during its normal operation and there are no signs of water leaks during operation. Thanks for any suggestions! Ron

  • RGoldstein Aug 02, 2008

    Problem solved and it had nothing to do with the washer (no surprise there) -- but now is a different kind of mystery. It turns out that when the automatic sprinkler system turned on (around 5 AM) water sprayed out of the junction between the hot water shut off valve and the hot water copper pipe and caused a small flood in the laundry room floor. Turn off the sprinkler and a very slow drip could be seen and that would flow to the drain area. The plumber had no clue as to why that would happen -- especially since the water pressure would be reduced when the sprinklers were on.

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 639 Answers
  • Posted on Sep 04, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Aug 24, 2008
Answers
639
Questions
1
Helped
165099
Points
1372

Peace,
ngafm1 at your service,

Water sprayed out of ( the leaky washers in the hot water shut off valve which need to be replaced.
They are inside all valves and wear out in time from normal use!
Or you can have a bad solder joint at the junction between the hot water shut off valve or the the pipe joint!
these washers in any shutoff valve can leak intermittently till they get worse and then leak all the time!
you should be able to stand there and watch it as you open and close the shut off valve again and again , and then stay there and watch it start leaking!
Or when you are opening it and closing the valve 4 times straight you may feel a trickle of water from the valve stem!!!!
This means washers in the valve stem need to be replaced!!!
Get a new plumber !!!!!!!!!!!!!!!!!! I'm no plumber but I do under stand this!


Bless You,
please give me a good rating here at fixya.com before you sign off!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a neptune front loader, after the wash cycle is complete the clothes smell like they have not even been wash with a **** moldy smell. I use Tide HE as directed but they still smell like i...

Hello, Thank You for using FixYa. I will be helping you today.Try 2 cups of white vinegar on a heavy duty cycle with hot water.Pour it in the detergent dispenser after it starts to fill. Also the affresh tablets work good i would use 3 tablets at one time if your unit is as bad as you say.
Thank You and please rate my answer if it was helpful..
0helpful
1answer

We are having a leak on the bottom of the front loader door on the wash cycle

Check the door seal. There is a boot drain on the seal that may be clogged. This drain allows the water to drain out of the seal when water gets in there. You may need to replace the seal. HEre is a link to the part you will need.
richroth_86.gif
Happy Holidays The FixYa Team
2helpful
1answer

Neptune MLG2000A doesn't drain completely and has moldy smell

You need to clean the stationary "brush" that collects lint and debris from the water during the cycle. The brush can be seen around the tub directly touching it along the bottom/front of the device. Right were I pour my detergent in, after the cloths are in there. To remove the debris I use a bottle brush. You can expect to use trial and error for your attempts. As far as the water being left.... My device has always left water in the bowl. I periodically just run a cycle with no cloths and bleach...HOT.....Mine is not spinning at the moment...again....I think its another call to the local dealer....AGAIN....
4helpful
1answer

My Maytag Neptune front loader always retains water after the rinsing cycle is complete. This has lead to mold in the door gasket and a moldy smell. Is it normal for water to stay in the machine after the...

pump is probably clogged not allowing all water to drain out. Should never see water in the tub at the end of a cycle. About once a month you should run your washer through a cycle with hot water and bleach. Doing that should keep the moldy smell down.
0helpful
1answer

Maytag front loader HE washer.

cheak your tube if there is a nail or an object is stuck in one of the holes
0helpful
1answer

Stackable Neptune Front Loader Washer Leak.

check that the door seals correctly on the rubber boot, check the boot for holes or rips, check the drain hose, tub to pump hose and pump.
0helpful
1answer

My Maytag Neptune fnt loader Model# MAH9700AWW

I have a Maytag neptune mah8700aww
With mine the large grey rubber seal that seals at door slipped off! When this happens if you do not put back on correctly it will leak or even poor out the front center bottom of the door! My husband fixed it. But it still leaked really bad! I just took a couple of min. to refit the seal and it does not leak at all now! maybe your seal is not placed around the edge correctly! as it is easy to place it wrong! good luck!! keep my email address if I was helpfull!! We can always share problems and solutions for our neptunes in the future ! good luck
Anne Marie
0helpful
1answer

Water leaks from the bottem of Maytag Neptune front loader

Your sewer drain may be backing up.
Check the drain during a final spin.
1helpful
1answer

Water leak from detergent drawer

Remove the control panel. Inside you will find a service tech sheet that will identify the error code.

There may be an obstruction in the water valve inlet flume forcing the water to travel in the wrong direction.
Not finding what you are looking for?

214 views

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...