Answer of 2009 fms paper - Answer Racing Ion Motorcycle Jersey 2010

Would it not be better, to ask these firms yourself? Then you also can add the details about what you want to find out.
Or sometimes you can find these things on Google too. Always here to help you with technical problems, when Google does not know the answer.
Success

FMS AUDIO, SY712, MODEL code 14787220,SERIAL NO :0094264 READS CODE ERROR. I DO NOT HAVE THE CODE. CAN YOU HELP?

go to the web site and down load it again thats what i did

my experience says jamming in duplex area using card stock. this may occur if default is duplexing. set default to single side and / or try same job using plain a4 80gm2

This is to easy fix.

Open FMS click on controls on the top menu.

A box will appear click on "Joystick interface" so it is hilighted blue.
Then click the button mapping and calibration.

When this box below appears put ticks in the "Inv" for the channels you wish to reverse. While you are here it may be a good time to
'Calabrate" click this button an follow the instruction. This will help your controls be more accurate. When your done click OK on each box untill you are back to the sim. Happy flying!!

The FMS SuperCup.par that comes with FMS is the closest to what you want.

To download the FMS flight sim go to this site http://n.ethz.ch/student/mmoeller/fms/index_e.html With windowsXP and earlier it will work fine.
BUT If you use vista you will need to also add this file to your computer "d3drm.dll" go to http://www.driverskit.net/dll/get/494.html to download the file. Then put it in your C:\Windows\System32 folder on your computer. It wont work until you do this. Good luck.

Your disk may be faulty; no worries though because FMS is freeware and is not owned by Esky.
To download the FMS flight sim go to this site http://n.ethz.ch/student/mmoeller/fms/index_e.html

Download version 7 and install it by double clicking on the file (fmsdisk01.exe) after it has been downloaded.

To set it up properly
.
Open FMS click on controls on the top menu.

A box will appear click on "Joystick interface" so it is hilighted blue.
Then click the button mapping and calibration.

When this box below appears put ticks in the "Inv" for the channels you wish to reverse. While you are here it may be a good time to
'Calabrate" click this button an follow the instructions. This will help your controls be more accurate. When your done click OK on each box untill you are back to the sim. Happy flying!!

good luck with your flying!

the hosting providers are at your service. contact them

i can remember my restriction code