Question about 2007 Yamaha Stratoliner S

1 Answer

2007 Yamaha Stratoliner S handlebar change

I am trying to change the handlebars on an 07 Stratoliner. I need to be able to take the wiring out of the bars so this means that I have to get into the headlight to the wiring. This is what I need help with. Will anyone help me Please?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 59,789 Answers

Hi, Sanders2003 for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How To for Liner Touring Bars
Handlebar Installation Tips and Tricks
Yamaha XV19SW Service Manual
OEM parts for Yamaha
Yamaha ROADLINER XV19SW Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on May 28, 2017

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 292 Answers

SOURCE: HANDLEBAR CHANGE/1999 ROYALSTAR

hi dennis. firstly there ain't no extra inside the headlight. it's very tight in there. remove the light using small phillips screws on either side. (dang what a mess)
you can slip off your old handlebar controls no problem, loosen them up before removing the riser clamps, then you can easily slip them off as you can move the bars to do so. slip controls on new bars and try mounting, if wires are too tight you will have to find them in the headlight and extend them.

Posted on Apr 12, 2009

Testimonial: "Thanks I got it.."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007 Yamaha Stratoliner S ISC unit is disabled. Is it still safe to operate?


Hi, Anonymous it is safe to operate however you will have starting and idle issues for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
How does the ISC work Suzuki GSX Motorcycle Forums Gixxer com
Thread Attn Stratoliner ISC high idle issue ref via TownsendFJR1300
Yamaha XV19SW Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA STRATOLINER XV19CTSC Owner Manual

Jul 05, 2014 | 2007 Yamaha Stratoliner S

1 Answer

Remove the handlebars from my 07 honda cbr1100xx


You first must remove all the controls on both sides; throttle, levers, and anything else attached to the bars. Then simply unbolt the bars from the steering neck.

Oct 18, 2012 | Motorcycles

1 Answer

Remove the handlebars from my 07 cbr1100xx


You first must remove all the hardware attached to the bars; throttle, levers, etc. Then simply unbolt the 4 bolts holding the bars to the steering head.

Oct 18, 2012 | Motorcycles

1 Answer

How do i change handlebars on a 2010 Dyna


Unplug the handlebar wires where they connect to the wiring harness. Remove the black electrical connectors at the end of the wires. Pull the wires through the ends of the handlebars. Silicone lubricant sprayed into the bars will make this a bit easier, and you should be able to leave the silver pins on the ends of the wires, saving yourself some work when installing your new bars. Leave the wires connected at the handlebar controls when doing this. Just unscrew the controls from the bars and pull the wires.

Aug 21, 2012 | 2000 Harley Davidson FXD Dyna Super Glide

1 Answer

I am trying to install Z Bar handle Bars on my Harley Davidson. I need install instructions on how to thread the wires.


I assume you are talking about running the wiring internal of the new handlebars and you need to know how to pull the wires through the them. You need to get a "fish tape" through the bars. The easiest way to get the fish tape into the bars is to start off by getting a string through them.

Use a shop vacuum and connect it to one end of the bars. Plug the other end of the bars temporarily. Turn on the vacuum cleaner and feed a string in from the hole in the center of the bars. If the bars are not too rough on the inside, the string will be sucked out the end of the bars.

Once you get the string through the bars, form a loop on the end of a scrap piece of wire and use the string to pull it through the bars. Now, use the wire to pull the switch wiring through the handlebar.

You may want to put some type of "sleeving" over the switch wiring so that you don't skin the insulation off the wires as you pull them through the handlebars.

Good Luck!!

Oct 30, 2009 | 2004 Harley Davidson VRSCA V-Rod

1 Answer

HANDLEBAR CHANGE/1999 ROYALSTAR


hi dennis. firstly there ain't no extra inside the headlight. it's very tight in there. remove the light using small phillips screws on either side. (dang what a mess)
you can slip off your old handlebar controls no problem, loosen them up before removing the riser clamps, then you can easily slip them off as you can move the bars to do so. slip controls on new bars and try mounting, if wires are too tight you will have to find them in the headlight and extend them.

Apr 11, 2009 | 1999 Yamaha Royal Star XVZ 1300 A

Not finding what you are looking for?
2007 Yamaha Stratoliner S Logo

Related Topics:

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Israel Pineiro Jr

Level 2 Expert

165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...