I need to replace the ignition switch on a 1995 Harley Davidson FLSTN. I tried to remove the plate to get at the ignition but was unable to take the cover plate off the tank. Can you give me step by step instructions on how to accomplish taking the old ignition out and replacing with a new one. thank you

If the ignition switch is under the dash that is on the tanks, you simply remove the small screw that holds the trip reset knob onto the speedometer and take the nut in the center of the dash off. The dash works up and off of the switch and speedo. That's all there is to getting the dash off. Sometimes it can be aggrevating due to the tight fit of the speedometer.

Good Luck
Steve