By ac you mean receptacles, not ac welding?
If so what about welding output on AC (DC)?
If welding is OK then you may have breaker or fuse problem.
If welding output is also low or no output your problem is the generator.
You should check your gen rpm to be normal. If so you may have field problem: rectifier, AVR etc.
If you can measure the field DC voltage at rated rpm, if it is missing (very low) try to find any circuit broken.
If you do not succeed answer this instruction in order to give you more.
Your rating means that you got no help from my instructions. If you had written some answer you may have had some further instructions given to you.
You better do not rate than give low rating to an answer to your incomplete questions, which have the purpose to clarify your question.
If you need more help you can ask, but with more details on my personal e-mail: [email protected]
×
722 views
Usually answered in minutes!
×