The red FI light has started flashing on my race bike. Engine intermittently and suddenly cuts power then idles on maintenance throttle. Occurs intermittently all through the rev range.
Turn engine off, wait until the next session and it works perfectly. Bike was working perfectly until we rebuilt it after a wreck. What did we do? Using Leo Vince exhaust and VP 110 race fuel. Have not been able to pull codes.
SOURCE: Engine cut out under revs but will idle
fueling problem. its not getting enought fuel from the carb. check the pipes, jets and floats.
SOURCE: rough running kawasaki
you need to let it warm up before beating on it. inline 4s are always cranky when cold. another issue could be dirty carbs and clogged carb jets causeing it to run extreemly lean, rev high and die out. pulling 4 carbs isnt "fun" but you could do it in an afternoon.
SOURCE: 1995 Vulcan 800 clutch problem?
1..Remove the air cleaner to see that it is setting right on the carb. 2..Check to see that there are no vacuum lines disconnected on the cabe or anywhere else. 3..Check to see that the accelerator pump linkage on the carb is not disconnected or broken [email protected]
SOURCE: What does the red flashing light mean?
when the red oil led is flashing on the bike when your not running it and with the key out, that is the immoblizer working.
SOURCE: I need the wiring diagram for the 2001 zx-6r
You'll find it here
http://www.carlsalter.com/motorcycle-manuals.asp
206 views
Usually answered in minutes!
×