Push the Caliper piston all the way in to allow installation of new brake pads by pushing the caliper body inward.
Remove the pad pin plug and loosen the pad pin.
Pull the pad pin out of the caliper body while pushing in the pads against the pad spring.
Remove the brake pads.
Install new brake pads into the caliper so thier ends rest into the pad retainer on the bracket properly. Install the pad pin by pushing in the pads against the pad spring to align the pad pin holes in the pads and caliper body.
Tighten the pad pin - torque 18N-m, 13ft-lb
Install pad pin plug and tighten - torque 3N-m, 2.2ft-lb
Operate the brake lever to seat the caliper piston against the pads.
Check brake fluid level.
Caliper mounting bolt (2) - torque 30N-m, 22ft-lb
891 views
Usually answered in minutes!
×