How to change bulb on Buell 1125 CR headlight
It is easy to remove. On the flyscreen (large plastic cosmetic cover) above the headlamp assembly, there are two screws (Torx T30) that are holding that on. Remove them to expose the wiring. Near the handle bars there will be two hex key screws (I forget the size), remove them. Picture pointing to the screws below:
After that, its just a matter of pulling the assembly forward and out. You will have easy access to the bulbs then. To reassemble follow all hte steps in reverse order.
1,154 views
Usually answered in minutes!
×